Skip to content

7″ Diamond Bite™ Universal Cut-Off Wheel

  • Diamond abrasive lasts up to 100x longer than conventional bonded abrasive wheels
  • Powers through almost any material — steel, stainless steel, cast iron, rebar, stone, concrete block, brick, ceramic tile, composites and more
  • Safer shatter-resistant core won’t blow apart like conventional bonded abrasive wheels
buy at Lowe's

More Details

Spyder Diamond Bite™ universal cut-off wheels feature a diamond abrasive edge, combined with a shatter-resistant steel core. Together, these ensure safe operation, reduced dust and debris and a much longer working life than typical wheels — up to 100x more cuts. For use on most materials including steel, stainless steel, cast iron, rebar, masonry, ceramic tile, composites, and more.

  • Diamond abrasive lasts up to 100x longer than conventional bonded abrasive wheels
  • Cut almost any material — steel, stainless steel, cast iron, rebar, stone, concrete block, brick, ceramic tile, composites and more
  • Safer shatter-resistant core won’t blow apart like conventional bonded abrasive wheels
  • Wheel retains its original diameter for a consistent cut — won’t shrink in diameter like conventional bonded abrasive wheels
  • Lowest cost per cut – spend less time replacing wheels and more time working
  • Reduced dust and debris during use

Product Specifications

Product #:

14007

Diameter:

7"

Arbor Size:

7/8" (5/8" bushing included)

Maximum RPM:

8,400

Power Tool / Saw:

Angle Grinder, Circular

Watch it Work

More Sizes

3″

4″

4-1/2″

5″

14″

Warning

Only use wheel for cutting applications that are listed on the front of the package – wheel is not intended for use as a grinding wheel. Use eye, face, dust and ear protection. Wear protective body apron, gloves and other PPE. Speed rating of diamond abrasive cut-off wheel must be greater than tool speed. Do not perform cutting operations without a Type 41/1A guard; guard foot should be adjusted for maximum operator protection and stability. Mount wheel with the flange and grinder nut intended for cut-off wheels. Run-in blade in tool for one minute before cutting application. Use the proper size angle grinder for the blade. Always use a support handle and start cutting with a light forward pressure. Important instructions and warnings are contained in the tool owner’s manual – please refer to the power tool owner’s manual before using the tool with this wheel. Failure to heed all safety instructions, warnings, and in-use recommendations by the power tool manufacturer regarding the use of the angle grinder and wheel could result in serious bodily injury.