3x3™ Reciprocating Saw Blades
- Plunge cut without pilot holes and cut in both directions without flipping your saw over.
- 8% Cobalt bi-metal blades cut the toughest metal materials
- Cost effective double-edged blades – 2 blades in 1
Selection Guide
LENGTH | TPI | APPLICATION | ITEM # |
|---|---|---|---|
6″ | 6 x 10 | Wood, Drywall, Laminated Wood | 200176 |
10/14 x 14 | Demolition & Metal | 200203 | |
14 x 18 | Metal, Nail-Embedded Wood, Fiberglass | 200180 | |
8″ | 6 x 10 | Wood, Drywall, Laminated Wood | 200177 |
8/12 x 10 | Advanced Demolition | 200206 | |
10 x 14 | Demolition & Metal | 200179 | |
10/14 x 14 | Extreme Metal, Nail-Embedded Wood, Thick and Thin Metal | 200205 | |
10″ | 8/12 x 10 | Advanced Demolition | 200207 |
10/14 x 14 | Extreme Metal, Nail-Embedded Wood, Thick and Thin Metal | 200204 | |
5pc Set | Various | Contains four 6″ blades [200176, (2) of 200203, 200180] and one 8″ blade [200177] | 200228 |
3x3™ Features
The double-edged Spyder 3X3 reciprocating saw blade lets you make multi-directional cuts without flipping your saw over. 8% Bi-metal cobalt cutting edges power through metals, wood with nails, and demolition tasks without overheating or wearing out. The rounded tip plunge cuts into drywall and other materials for added cutting versatility. Two cutting edges means 2x the life in each 3X3 blade. Exceptional strength, versatility and durability.
- 8% cobalt bi-metal blades cut the toughest metal materials
- Cost effective double-edged blades — 2 blades in 1
- Double-edged blade cuts both ways and plunge cuts
- Cobalt bi-metal blades cut the toughest materials – metals, woods, plastics, etc
- 3X3 — strength, versatility, durability
- Rounded tip makes plunge cuts with ease
- Made in Germany
Watch it work
Warning
To reduce the risk of injury, read the instruction manual and follow the safety regulations of the power tool you will be using with your Spyder accessory. Use personal protective equipment. Always wear eye protection. Protective equipment such as a dust mask, non-skid safety shoes, protective apparel and hearing protection should be used in appropriate conditions to reduce the risk of personal injury. WARNING: Operating the tool without wearing proper protection may result in serious injury. Reciprocating blades can cause lacerations and puncture wounds. To reduce the risk of explosion, electric shock, and property damage, always check the work area for hidden gas pipes, electrical wires, and water pipes before making blind and/or plunge cuts. Before each use, make sure the blade is unbent and check the blade for wear, cracks, and other damage. Do not use an excessively worn or damaged blade as this can cause blade binding, kickback, create dangerous flying debris and/or create other unsafe situations that may cause injury. Use the proper blade for your material.