Skip to content

3-IN Diamond Edge Universal Cut-Off Wheel

Diamond abrasive edge, combined with a shatter-resistant steel core.

  • Diamond abrasive lasts 100x longer than conventional bonded abrasive wheels
  • Cut almost any material – steel, stainless steel, cast iron, rebar, stone, concrete block, brick, ceramic tile, composites and more
  • Safer shatter-resistant core won’t blow apart like conventional bonded abrasive wheels

More Details

The Spyder Diamond Edge universal cut-off wheel features a diamond abrasive edge, combined with a shatter-resistant steel core. Together, these ensure safe operation, reduced dust and debris and a much longer working life than typical wheels – up to 100x more cuts. For use on most materials including steel, stainless steel, cast iron, rebar, masonry, ceramic tile, composites, and more.

  • Diamond abrasive lasts 100x longer than conventional bonded abrasive wheels
  • Cut almost any material – steel, stainless steel, cast iron, rebar, stone, concrete block, brick, ceramic tile, composites and more
  • Safer shatter-resistant core won’t blow apart like conventional bonded abrasive wheels
  • Wheel is always 4-1/2-in diameter for a consistent cut – won’t shrink in diameter like conventional bonded abrasive wheels
  • Lowest cost per cut – spend less time replacing wheels and more time working
  • Reduced dust and debris during use
  • For use on angle grinders with a 7/8-in arbor and a maximum RPM of 13,000

Product Specifications

Arbor:

3/8 - 1/4"

Product #:

14003

Lowe's Item #:

5092364

Origin:

China

UPC:

884835004675

Watch it Work

Warning

Only use wheel for cutting applications that are listed on the front of the package – wheel is not intended for use as a grinding wheel. Use eye, face, dust and ear protection. Wear protective body apron, gloves and other PPE. Speed rating of diamond abrasive cut-off wheel must be greater than tool speed. Do not perform cutting operations without a Type 41/1A guard; guard foot should be adjusted for maximum operator protection and stability. Mount wheel with the flange and grinder nut intended for cut-off wheels. Run-in blade in tool for one minute before cutting application. Use the proper size angle grinder for the blade. Always use a support handle and start cutting with a light forward pressure. Important instructions and warnings are contained in the tool owner’s manual – please refer to the power tool owner’s manual before using the tool with this wheel. Failure to heed all safety instructions, warnings, and in-use recommendations by the power tool manufacturer regarding the use of the angle grinder and wheel could result in serious bodily injury.