Hole Saws

Rapid Core Eject (RCE) tungsten carbide tipped (TCT) hole saws

3/4″

7/8″

1″

1-1/8″

1-1/4″

1-3/8″

1-1/2″

1-5/8″

1-3/4

1-7/8″

2″

2-1/8″

2-1/4″

2-3/8″

2-1/2″

2-9/16″

2-5/8″

2-3/4″

3″

3-1/4″

3-1/2″

3-5/8″

3-3/4″

4″

4-1/8″

4-1/4″

4-1/2″

4-5/8″

4-3/4″

5″

5-1/2″

5-3/4″

6″

6-1/4″

6-3/8″

6-5/8″

RCE TCT features

  • Up to 10x more cuts than bi-metal hole saws.
  • Up to 5x faster than standard hole saws.
  • Tungsten Carbide Tipped provides extended life and clean cuts.
  • Cuts wood, concrete block, brick, cement fiberboard, ceramic wall tile, PVC, and more, (with a Mohs hardness of less than 6).
  • Utilizes Rapid Core Eject™ Arbor System – rapidly eject the core, quickly change diameter, cut at an angle, and enlarge existing holes.

Watch it work

Rapid Core Eject (RCE) Tarantula hole saws

7/8″

1″

1-1/16″

1-1/8″

1-1/4″

1-3/8″

1-1/2″

1-5/8″

1-3/4″

1-7/8″

2″

2-1/8″

2-1/4″

2-3/8″

2-1/2″

2-9/16″

2-5/8″

2-3/4″

3″

3-1/2″

3-5/8″

4″

4-1/4″

4-1/2″

RCE Tarantula features

  • Up to 50x more cuts than bi-metal hole saws.
  • Up to 10x faster than standard hole saws.
  • Carbide tipped for extended life in tough materials.
  • Cuts nail embedded wood, steel, stainless steel, cast iron, plastics, non-ferrous metals, cement fiber board and more.
  • Up to 2-3/8″ Depth of Cut.
  • Utilizes Rapid Core Eject™ Arbor System – rapidly eject the core, quickly change diameter, cut at an angle, and enlarge existing holes.
  • Up to 2-5/8″ Depth of Cut.
  • Utilizes Rapid Core Eject™ Arbor System – rapidly eject the core, quickly change diameter, cut at an angle, and enlarge existing holes.

Watch it work

Rapid Core Eject (RCE) Bi-Metal hole saws

3/4″

7/8″

1″

1-1/8″

1-1/4″

1-3/8″

1-1/2″

1-5/8″

1-3/4″

1-7/8″

2″

2-1/8″

2-1/4″

2-3/8″

2-1/2″

2-5/8″

2-3/4″

3″

3-1/4″

3-1/2″

3-5/8″

4″

4-1/8″

4-1/4″

4-1/2″

4-5/8″

4-3/4″

5″

5-1/2″

5-3/4″

6″

6-3/8″

6-5/8″

RCE Bi-Metal features

  • Variable tooth pitch guarantees a fast and clean cut through all thicknesses.
  • Creates smooth cuts in steel, stainless steel, aluminum, nail embedded wood, non-ferrous metal, plastics/PVC and more.
  • Up to 1-7/8″ Depth of Cut.
  • Utilizes Rapid Core Eject™ Arbor System – rapidly eject the core, quickly change diameter, cut at an angle, and enlarge existing holes.

Watch it work

Tungsten Carbide Tipped (TCT) Deep Cut hole saws

1-1/4″

1-3/4″

2″

2-3/8″

2-9/16″

3″

3-3/8″

3-5/8″

4″

4-1/8″

4-3/8″

4-3/4″

5-1/4″

6″

TCT Deep Cut features

  • Up to 10x more cuts than bi-metal hole saws.
  • Up to 5x faster than standard hole saws.
  • Tungsten Carbide Tipped for extended life and clean cuts.
  • Cuts wood, concrete block, brick, cement fiberboard, ceramic wall tile, PVC, and more, (with a Mohs hardness of less than 6).
  • Up to 6-1/4″ Depth of Cut.\
  • Deep Cut Hole Saws use Hex11 deep cut arbor and pilot bit.
  • For use in standard rotary drills, not for use in hammer drill mode.

Watch it work

Diamond Edge Hole Saws

3/16″

1/4″

5/16″

3/8″

1/2″

5/8″

3/4″

1″

1-1/4″

1-3/8″

1-1/2″

2″

2-1/2″

Arbor

Diamond Edge Arbored Hole Saw Set

Arbored Diamond Hole Saw Set

Diamond Edge Features

  • Up to 20x more holes than standard diamond hole saws.
  • Up to 10x faster than standard glass and tile hole saws.
  • Premium boron-coated, industrial diamond abrasive self-sharpens for quick cuts and long life in tough tile/masonry materials.
  • High-temperature, nickel braze adheres at temperatures up to 1.5x the braze of standard diamond hole saws, for increased diamond abrasive retention.
  • Can be used wet or dry – water spray or immersion will increase tool life, reduce dust and debris, and create a more quiet cut.
  • For use on ceramic, porcelain, granite, slate, marble, glass, fiber cement board, laminates and more.
  • Made in the USA

Watch it work

Warning

Hex-based pilot bits are intended to be used with a hex arbor adapter and hole saws. To minimize the risk of serious injury always use eye/respiratory protection and other PPE. Use the pilot bit and hole saw to drill only the materials listed on the product label. Make certain that the pilot bit is correctly sized for the hole saw being used. Always be sure that the drill bit protrudes above the saw teeth ¼” to 1” depending on the size of the saw. Follow RPM recommendations on the packaging for materials being cut and diameter of saw being used. Check the hole saw before use in the power tool – if excessive wear is present, the saw is bent, teeth are fractured or damaged, replace saw before use. Use a drill motor that is equipped with a support handle and start drilling with a light forward pressure. Important instructions and warnings are contained in the tool owner’s manual – please refer to the power tool owner’s manual before using the tool with this tool. Failure to heed all safety instructions, warnings, and in-use recommendations by the power tool manufacturer regarding the use of the reciprocating saw and blade could result in serious bodily injury.

WARNING
HOLE SAWS ARE NOT TO BE USED IN HAMMER OR IMPACT MODE – only drill in standard rotary drilling mode or saw may become damaged/broken and may increase the likelihood of user injury.