Reciprocating Accessories

Spyder Scraper

Its carbon steel blade rips through countless surfaces in no time.

Scraper Features

  • Easily remove tile, linoleum flooring, mastics and more.
  • Quenched and tempered high-carbon spring steel retains edge sharpness.
  • Re-sharpenable blade extends tool life.
  • Multiple applications.
  • Fits all reciprocating saws.
  • Made in the U.S.A.

Scraper Selection Guide

DESCRIPTION
CARDED
BULK
2″ Spyder Scraper™
00138
00319
4″ Spyder Scraper™
00108
00320
6″ Spyder Scraper™
00137
00321
Spyder Scraper™ Kit – Contains (1) each of 2″, 4″ and 6″
00243
00234

Watch it work

Safety Warnings

Reciprocating scrapers can cause serious injury, lacerations or puncture wounds. Kick back may occur if power tool instructions are not followed. Always wear a mask to prevent inhalation of dust and debris. Wear safety glasses and protective apparel to prevent injury from flying debris. Check the scraper before use in the power tool – if excessive wear is present, the brush is bent, cracked or damaged, replace brush before use. Important instructions and warnings are contained in the tool owner’s manual – please refer to the power tool owner’s manual before using the tool with this tool. Failure to heed all safety instructions, warnings, and in-use recommendations by the power tool manufacturer regarding the use of the reciprocating saw and scraper could result in serious bodily injury.

WARNING
NOT INTENDED FOR CONCRETE DEMOLITION – Scraper blade is intended for removing light surface contaminants and is not intended to replace a hammer drill; scraper can bend, break or fracture and may result in increased kick back or user injury if used for any purpose [like concrete demolition, etc] other than removing light surface contaminants.

Brushes

Remove stubborn layers of rust, paint, dirt and grime in a snap.

Carbon Steel Wire Brush

  • Removes flaking paint, rust, scratches, dirt and small imperfections.
  • Tough carbon steel bristles remove the toughest contaminants.
  • Use on metals, concrete, stone and wood surfaces.
  • Fits all reciprocating saws.

Nylon Brush

  • Nylon bristles provide tough cleaning power without scratching surfaces.
  • Makes quick work of stubborn layers of grime.
  • Use on grout, carpet, tile, laminates, rubber, concrete, brick and more.
  • Fits all reciprocating saws.

Durable nylon & tough carbon steel wire brushes

DESCRIPTION
APPLICATION
CARDED
BULK
Carbon Steel Wire Brush
Clean metals, concrete, stone and wood surfaces.
400002
400005
Nylon Brush
Clean grout, carpet, tile, laminates, rubber, concrete, brick and more.
400004
400006

Watch it work

Safety Warnings

Reciprocating brushes can cause serious injury. Kick back may occur if power tool instructions are not followed. Always wear a mask to prevent inhalation of dust and debris. Wear safety glasses and protective apparel to prevent injury from flying debris. Check the brush before use in the power tool – if excessive wear is present, the brush is bent, cracked or damaged, replace brush before use. Important instructions and warnings are contained in the tool owner’s manual – please refer to the power tool owner’s manual before using the tool with this tool. Failure to heed all safety instructions, warnings, and in-use recommendations by the power tool manufacturer regarding the use of the reciprocating saw and blade could result in serious bodily injury.

Grout-Out

Its carbide-grit edge makes it easy to replace one tile—or all of them.

Grout-Out Features

  • Fits all reciprocating saws
  • 10x faster than hand removal
  • Vacuum-braised tungsten carbide grit
  • Power through any grout in a fraction of the time—including urethane and epoxy
  • 1/16″ blade is designed for joints 1/16″ to 3/16″ wide
  • 3/16″ blade is designed for joints 3/16″ and wider
  • Do not use with saws that operate with orbital action

Watch it work

Safety Warnings

Reciprocating tools can cause serious injury. Kick back may occur if power tool instructions are not followed. Always wear a mask to prevent inhalation of dust and debris. Wear safety glasses and protective apparel to prevent injury from flying debris. Check the sander before use in the power tool – if excessive wear is present, the brush is bent, cracked or damaged, replace brush before use. Important instructions and warnings are contained in the tool owner’s manual – please refer to the power tool owner’s manual before using the tool with this tool. Failure to heed all safety instructions, warnings, and in-use recommendations by the power tool manufacturer regarding the use of the reciprocating saw and sander could result in serious bodily injury.

Sander

Make quick work of tight spaces, curved surfaces and hard-to-reach corners.

Sander Features

  • Corner Sanding Pad
  • Quickly sands tight spaces, curved surfaces, and outside and inside corners
  • Tough insert-molded attachment blade for maximum durability
  • Hock-and-loop sandpaper for quick and easy replacement
  • Compatible with Mouse™ sandpaper
  • Fits all reciprocating saws

Sander Features

DESCRIPTION
APPLICATION
PART #
Sander with 3 piece corner sandpaper set
Sand tight spaces, curved surfaces and outside and inside corners.
500010

Watch it work

Safety Warnings

Reciprocating tools can cause serious injury. Kick back may occur if power tool instructions are not followed. Always wear a mask to prevent inhalation of dust and debris. Wear safety glasses and protective apparel to prevent injury from flying debris. Check the sander before use in the power tool – if excessive wear is present, the brush is bent, cracked or damaged, replace brush before use. Important instructions and warnings are contained in the tool owner’s manual – please refer to the power tool owner’s manual before using the tool with this tool. Failure to heed all safety instructions, warnings, and in-use recommendations by the power tool manufacturer regarding the use of the reciprocating saw and sander could result in serious bodily injury.