8-Piece Bi-Metal Hole Saw Kit (1-1/4, 1-3/8, 1-1/2, 2, 2-1/2") Rapid Core Eject® Bi-Metal

8-Piece Bi-Metal Hole Saw Kit (1-1/4, 1-3/8, 1-1/2, 2, 2-1/2") Rapid Core Eject® Bi-Metal

SKU: 600991

Rapid Core Eject® System Drill, press, pull back, and eject—no more prying cores out by hand.
Angle & Enlargement Cutting Cut clean holes at an angle or easily enlarge existing holes using two adapters on one pilot bit.
Fast Changeovers Push a button to swap hole saw diameters quickly and keep working without downtime.

Product Details

Make every cut faster, easier, and smarter with Spyder® Bi-Metal Hole Saws featuring the Rapid Core Eject® arbor system. Cut holes at any angle, eject cores instantly with the press of a button, and swap diameters in seconds—all without the hassle of prying. With tough bi-metal steel construction and variable tooth pitch geometry, these saws deliver smooth, durable performance through wood (even with nails), metals, and plastics. Whether you’re drilling fresh holes or enlarging existing ones, Spyder’s innovative system keeps you moving, saving time and effort on every job.

Why Choose Spyder Rapid Core Eject® Bi-Metal

Rapid Core Eject® System - Drill, press, pull back, and eject—no more prying cores out by hand.

Angle & Enlargement Cutting - Cut clean holes at an angle or easily enlarge existing holes using two adapters on one pilot bit.

Fast Changeovers - Push a button to swap hole saw diameters quickly and keep working without downtime.

Durable Bi-Metal Construction - Variable tooth pitch and hardened steel provide smoother, longer-lasting cuts through wood with nails, metals, and plastics.

Complete Pro Kit - Includes five popular hole saw sizes (1-1/4", 1-3/8", 1-1/2", 2", 2-1/2") plus Hex10 adapter and two HSS pilot bits for versatile applications.

Use personal protective equipment. Always wear eye protection.

Protective equipment such as a dust mask, non-skid safety shoes, protective apparel and hearing protection should be used in appropriate conditions to reduce the risk of personal injury.

WARNING:

Operating the tool without wearing proper protection may result in serious injury.

Do not use near flammable materials or gases!

To reduce the risk of explosion, electric shock, and property damage, always check the work area for hidden gas pipes, electrical wires, and water pipes when making blind and/or plunge cuts.

Before each use:

Check that the hole saw is free from damage and excessive wear. Discard hole saw if damage is noticed or suspected as this can cause excessive friction, saw binding, kickback, create dangerous flying debris and/or create other unsafe situations that may cause injury.

Use a pilot bit which is correctly sized for the hole saw being used.

Hex-based pilot bits are intended to be used with hex-based arbor adapters and hole saws. Use a pilot bit which is correctly sized for the hole saw being used. Always be sure that the pilot bit extends beyond the cutting edge of the saw by at least ¼”; for deep cut hole saws, the pilot bitshould extend at least 1” beyond the cutting edge of the saw.

WARNING: Hole saws are not to be used in hammer or impact mode!

Only drill in standard rotary drilling mode. Drilling in hammer or impact mode can cause the hole saw to become damaged/broken and can increase the likelihood of user injury due to dangerous flying debris or other unsafe situations. For TCT saws recommended for use on concrete products, brick, or tile materials, check the Mohs hardness of the material to be drilled. Materials like poured concrete, some brick/block, floor tile, ceramic tile, porcelain, and others, may have a Mohs hardness of higher than 6. The TCT hole saw is not recommended for use in materials with a Mohs hardness of higher than 6.

To reduce the risk of injury:

Read the Spyder Hole Saw RPM Chart for the recommended operating speed for the saw size and the material being cut. Use the proper pilot bit and hole saw for your material. Only drill materials that are listed on the product label. Use a drill motor that is equipped with a support handle. Start cutting with a light forward pressure. For cuts that are square to the surface, start the cutting process with the saw square to the material being cutso all teeth begin to cut at the same time. This will help prevent premature wear and damage to the saw. Feeding the saw in and out or using a slight circular rocking motion may assist in clearing material shavings from the hole being cut. When sawing in wood, finish the hole from the opposite side to prevent splintering. Once the pilot bit has broken through the other side, you can use this hole to guarantee you are in line with where you have already started cutting.