Sierra de corona sin mandrilar Diamond Edge de 1-1/4"

Sierra de corona sin mandrilar Diamond Edge de 1-1/4"

SKU: 600857

Hasta 20 veces más agujeros que las sierras de corona de diamante estándar
Hasta 10 veces más rápido que las sierras estándar para vidrio y baldosas .
Se puede utilizar húmedo o seco para una mayor versatilidad .
Úselo con la broca piloto con punta de carburo Spyder 600862 con adaptador de eje .
Abrasivo de diamante industrial recubierto de boro de primera calidad que se autoafila para cortes rápidos y una larga vida útil en materiales resistentes de baldosas y mampostería .
La construcción robusta de una sola pieza y el acero de alta aleación tratado térmicamente en horno de vacío proporcionan un corte confiable y orificios redondos y consistentes .
Para uso en cerámica, porcelana, granito, pizarra, mármol, vidrio, tableros de fibrocemento, laminados y más .
Hecho en EE.UU. -

Product Details

Spyder diamond hole saws are the professional choice for hole-making in tile, glass and masonry materials. Premium boron-coated industrial diamond abrasive self-sharpens for quick cuts and long — up to 20x more holes than standard diamond hole saws and up to 10x faster than standard glass and tile bits. A high temperature nickel braze adheres at temperatures up to 1.5x the temperature of braze used on standard diamond hole saws — increasing diamond abrasive retention and saw life. Heavy-duty, single piece construction and vacuum furnace heat treated high-alloy steel provides a reliable cut and consistent, round holes. These saws can be used wet or dry — water spray or immersion will increase tool life, reduce dust and debris, and will create a more quiet cut. Spyder’s diamond hole saws are for use on ceramic, porcelain, granite, slate, marble, glass, fiber cement board, laminates and more. Made in the USA.

Why Choose Spyder

Up to 20x more holes than standard diamond hole saws

Up to 10x faster than standard glass and tile saws

Can be used wet or dry for increased versatility

Use with Spyder 600862 Carbide Tip Pilot Bit with Arbor Adapter

Premium boron-coated industrial diamond abrasive self-sharpens for quick cuts and long life in tough tile and masonry materials

Heavy-duty single piece construction and vacuum furnace heat treated high-alloy steel provides a reliable cut and consistent, round holes

For use on ceramic, porcelain, granite, slate, marble, glass, fiber cement board, laminates and more

Made in the USA

To reduce the risk of injury:

Read the instruction manual and follow the safety regulations of the power tool you will be using with your Spyder accessory.

Use personal protective equipment. Always wear eye, face, hearing, and respiratory protection.

Use the appropriate mask or respirator in dusty work conditions. Protective equipment such as a body apron and non-skid safety shoes should be used in appropriate conditions to reduce the risk of personal injury.

WARNING:

Operating the tool without wearing proper protection may result in serious injury.

Do not use near flammable materials or gases!

To reduce the risk of explosion, electric shock, and property damage, always check the work area for hidden gas pipes, electrical wires, and water pipes when making blind cuts.

Before each use:

Check that the hole saw is free from damage and excessive wear. Discard hole saw if damage is noticed or suspected as this can cause excessive friction, saw binding, kickback, create dangerous flying debris and/or create other unsafe situations that may cause injury.

WARNING: Diamond hole saw bits and cups are not to be used in hammer or impact mode!

Only drill in standard rotary drilling mode. Drilling in hammer or impact mode can cause the hole saw to become damaged/broken and can increase the likelihood of user injury due to dangerous flying debris or other unsafe situations.

To reduce the risk of injury:

Only drill materials that are listed on the package. Use a drill motor that is equipped with a support handle. To avoid dust inhalation, use a water bath during use. Water spray or immersion will increase tool life, reduce dust and debris, and create a quieter cut.

Sierra de corona sin mandrilar Diamond Edge de 1-1/4"

Product Details

Why Choose Spyder

Up to 20x more holes than standard diamond hole saws

Up to 10x faster than standard glass and tile saws

Can be used wet or dry for increased versatility

Use with Spyder 600862 Carbide Tip Pilot Bit with Arbor Adapter

Premium boron-coated industrial diamond abrasive self-sharpens for quick cuts and long life in tough tile and masonry materials

Heavy-duty single piece construction and vacuum furnace heat treated high-alloy steel provides a reliable cut and consistent, round holes

For use on ceramic, porcelain, granite, slate, marble, glass, fiber cement board, laminates and more

Made in the USA

Safety Instructions & Warnings

To reduce the risk of injury:

Use personal protective equipment. Always wear eye, face, hearing, and respiratory protection.

WARNING:

Do not use near flammable materials or gases!

Before each use:

WARNING: Diamond hole saw bits and cups are not to be used in hammer or impact mode!

To reduce the risk of injury: