Disco de amolar de óxido de aluminio Bite™ de 4,5" (tipo 27, 1/4" de grosor), paquete de 3

Disco de amolar de óxido de aluminio Bite™ de 4,5" (tipo 27, 1/4" de grosor), paquete de 3

SKU: 21126-3

El abrasivo de óxido de aluminio de primera calidad proporciona una rápida eliminación del material y una larga vida útil .
El diseño reforzado permite una extracción de material más rápida en herramientas que funcionan a batería y un rendimiento extendido en herramientas enchufables de alto torque .
Perfil central deprimido tipo 27 para rectificado descentrado y cortes al ras -
Mandril de 7/8 pulg .
13.250 RPM máximas -

Product Details

Spyder Bite aluminum oxide abrasive bonded grinding wheels provide fast cuts and quick material removal on mild steel, stainless steel, ferrous metal and cast iron. A reinforced design yields more fast material removal on battery-operated tools and provides extended performance on higher torque plug-in tools.

Why Choose Spyder Bite™

Premium Aluminum Oxide Abrasive Provides Fast Material Removal and Long Service Life

Reinforced design yields more fast material removal on battery-operated tools and extended performance on high-torque plug-in tools

Type 27 depressed center-profile for offset grinding and flush cuts

7/8-in arbor

13,250 Max RPM

To reduce the risk of injury:

Read the instruction manual and follow the safety regulations of the power tool you will be using with your Spyder accessory.

Use personal protective equipment. Always wear eye, face, hearing, and respiratory protection.

Use the appropriate mask or respirator in dusty work conditions. Protective equipment such as a body apron and non-skid safety shoes should be used in appropriate conditions to reduce the risk of personal injury.

WARNING:

Operating the tool without wearing proper protection may result in serious injury. Exposure to noise can cause hearing loss.

Do not use near flammable materials or gases!

Fire or explosion may result due to ignition from the hot surface. To reduce the risk of explosion, electric shock, and property damage, always check the work area for hidden gas pipes, electrical wires, and water pipes when making blind cuts.

Before each use:

Check that the wheel is free from cracks, chips, and other damage. Discard wheelif dropped, cracked, or chipped, or if any other damage is noticed or suspected as this can cause excessive friction, wheel binding, kickback, create dangerous flying debris and/or create other unsafe situations that may cause injury.

Always use wheel of the correct size with the correct arbor hole size for your power tool.

Wheels that do not match the mounting hardware of the power tool will run eccentrically, causing loss of control. Mount wheel with the flange and nut intended for the power tool. Make sure the speed marked on the wheel is at least as high as the no-load RPM marked on the power tool.

To reduce the risk of injury:

Never operate wheel without a Type 41/A guard in place; guard foot should be adjusted for maximum operator protection and stability. Only use wheel for cutting materials that are listed on the package. After installing wheel and before cutting application, run wheel in power tool for one minute, facing away from any persons in the vicinity. Start cutting with a light forward pressure. Do not jam, twist or pinch wheel in the workpiece, or apply excessive side pressure to the wheel – kickback may occur if wheel is jammed. Do not grind on the side of the wheel face, as would be done when using a grinding wheel. Always let the wheel come to a complete stop before setting the power tool down. Do not touch wheel immediately after use as it may still be hot and burn you.

Disco de amolar de óxido de aluminio Bite™ de 4,5" (tipo 27, 1/4" de grosor), paquete de 3

Product Details

Why Choose Spyder Bite™

Premium Aluminum Oxide Abrasive Provides Fast Material Removal and Long Service Life

Reinforced design yields more fast material removal on battery-operated tools and extended performance on high-torque plug-in tools

Type 27 depressed center-profile for offset grinding and flush cuts

7/8-in arbor

13,250 Max RPM

Safety Instructions & Warnings

To reduce the risk of injury:

Use personal protective equipment. Always wear eye, face, hearing, and respiratory protection.

WARNING:

Do not use near flammable materials or gases!

Before each use:

Always use wheel of the correct size with the correct arbor hole size for your power tool.

To reduce the risk of injury: