Lame de scie circulaire de démolition Tarantula™ 7-1/4" 24 dents TCT

SKU: 13006

Jusqu'à 10 fois plus durable que les lames ordinaires -
Les dents de coupe ultra résistantes en NiCo (nickel cobalt) permettent les coupes les plus nettes -
Le revêtement antifriction et les évents de stabilisation réduisent la chaleur et les vibrations pour des coupes fiables -
Les évents de stabilisation remplis de polymère réduisent le bruit et les vibrations -
Les dents d'entraînement Demo Drive et le revêtement antifriction interfusé offrent des coupes exceptionnellement douces -
Les dents Demo Drive sont affûtées 4x pour fournir des coupes exceptionnellement nettes pour traverser le bois incrusté de clous -
Arbre de 5/8 po avec évidement diamanté -
Pour une utilisation sur des scies circulaires avec un régime maximal de 10 000 tr/min -
Non recommandé pour les sols stratifiés contrecollés -

Product Details

Rip and crosscut with ease with Spyder Tarantula™ Demolition circular saw blades. NiCo teeth provide clean cuts and exceptionally long life in demo applications — cut wood with hidden nails, screws and flashing with this durable blade. Tracking straight with reduced friction, heat and noise, Tarantula circular saw blades are the professionals’ choice for framing and construction. Demo blade is for use in new wood materials and in demolition applications where nails, screws, staples, flashing, etc., may be hidden in the material to be cut. Up to 10x the life of standard carbide blades.

Why Choose Spyder Tarantula™

Up to 10x longer lasting than regular blades

Ultra tough NiCo (nickel cobalt) cutting teeth make the cleanest cuts

Anti-friction coating and stabilization vents reduce heat and vibration for reliable cuts

Polymer-filled stabilization vents reduce noise and vibrations

Demo Drive teeth and interfused anti-friction coating provides exceptionally smooth cuts

Demo Drive teeth are sharpened 4x to provide exceptionally clean cuts to power through nail embedded wood

5/8-in arbor with diamond knock-out

For use on circular saws with a 10,000 max RPM

To reduce the risk of injury:

Read the instruction manual and follow the safety regulations of the power tool you will be using with your Spyder accessory.

Use personal protective equipment. Always wear eye protection.

Protective equipment such as a dust mask, non-skid safety shoes, and protective apparel should be used in appropriate conditions to reduce the risk of personal injury.

WARNING:

Operating the tool without wearing proper protection may result in serious injury. Exposure to noise can cause hearing loss.

Do not use near flammable liquids or in explosive atmospheres, near fumes, gases, or dust.

The hot chips or shavings and sparks may ignite the dust or fumes. Remove materials or debris that may become ignited from work area. To reduce the risk of explosion, electric shock, and property damage, always check the work area for hidden gas pipes, electrical wires, and water pipes when making blind and/or plunge cuts.

Before each use:

Check that the blade is sharp, clean, and free from damage. Do not use a dull, dirty, or damaged blade as this may result in kickback, blade pinching, binding or stalling, and loss of control. These situations may cause the power tool to jump back at the operator and can result in a serious injury.

WARNING:

Only use a metal-cutting blade on a saw that is designed for metal cutting. Using a metal-cutting blade on a wood-cutting circular saw can result in damage to the saw, damage to the blade, and serious injury to the user.

Always use blades of the correct size with the correct arbor hole shape and size for your power tool.

Blades that do not match the mounting hardware of the power tool will run eccentrically, causing loss of control.
To assure proper rotation direction of the saw blade, the arrow direction on the blade must correspond with the arrow direction on the power tool.
Mount blade properly with the correct blade washers and bolt for your power tool.
Make sure the speed marked on the blade is at least as high as the no-load RPM marked on the power tool.

To reduce the risk of injury:

Never operate the power tool without proper safety guards in place. Beware of ejecting chips as they become hot during cutting.

Lame de scie circulaire de démolition Tarantula™ 7-1/4" 24 dents TCT

Product Details

Why Choose Spyder Tarantula™

Up to 10x longer lasting than regular blades

Ultra tough NiCo (nickel cobalt) cutting teeth make the cleanest cuts

Anti-friction coating and stabilization vents reduce heat and vibration for reliable cuts

Polymer-filled stabilization vents reduce noise and vibrations

Demo Drive teeth and interfused anti-friction coating provides exceptionally smooth cuts

Demo Drive teeth are sharpened 4x to provide exceptionally clean cuts to power through nail embedded wood

5/8-in arbor with diamond knock-out

For use on circular saws with a 10,000 max RPM

Safety Instructions & Warnings

To reduce the risk of injury:

Use personal protective equipment. Always wear eye protection.

WARNING:

Do not use near flammable liquids or in explosive atmospheres, near fumes, gases, or dust.

Before each use:

WARNING:

Always use blades of the correct size with the correct arbor hole shape and size for your power tool.

To reduce the risk of injury: