Lame de scie circulaire ultra-fine Tarantula™ 6-1/2" 48 dents TCT

SKU: 13025

Jusqu'à 6 fois plus durable que les lames ordinaires — coupe transversale et déchirure en toute simplicité -
Les dents de coupe ultra résistantes en NiCo (nickel cobalt) permettent les coupes les plus nettes -
Fonctionnement fluide et coupe rapide — Les lames Tarantula™ offrent une coupe durable tout au long de la durée de vie de la lame -
Le biseau des dents alternées avec un râteau à dessus plat (ATB-R) et un revêtement antifriction interfusé offrent des coupes exceptionnellement lisses -
Les évents de stabilisation remplis de polymère réduisent le bruit et les vibrations pour une coupe plus droite -
arbre de 1 po -
Pour une utilisation sur des scies circulaires avec un maximum de 6 000 tr/min -
Non recommandé pour les sols stratifiés contrecollés -

Product Details

Rip and crosscut with ease with Spyder Tarantula™ Fine and Ultra Fine circular saw blades. NiCo teeth are sharpened 3x to provide clean cuts and exceptionally long life. Tracking straight with reduced friction, heat and noise, Tarantula circular saw blades are the professionals choice for framing and construction. Fine and ultra fine blades are for use in new wood materials and provide the cleanest cuts on soft and hard woods, trim, MDF and plywood. Up to 6x the life of standard carbide blades.

Why Choose Spyder Tarantula™

Up to 6x longer lasting than regular blades — rip and cross cut with ease

Ultra tough NiCo (nickel cobalt) cutting teeth make the cleanest cuts

Smooth running and quick cutting — Tarantula™ blades provide durable cutting over the life of the blade

Alternating tooth bevel with a flat top raker (ATB-R) and interfused anti-friction coating provides exceptionally smooth cuts

Polymer-filled stabilization vents reduce noise and vibrations for a straighter cut

1-in arbor

For use on circular saws with a 6,000 RPM maximum

Not recommended for engineered laminate flooring

To reduce the risk of injury:

Read the instruction manual and follow the safety regulations of the power tool you will be using with your Spyder accessory.

Use personal protective equipment. Always wear eye protection.

Protective equipment such as a dust mask, non-skid safety shoes, hard hat and hearing protection should be used in appropriate conditions to reduce the risk of personal injury

WARNING:

Operating the tool without wearing proper eye protection may result in serious injury.

To reduce the risk of explosion, electric shock, and property damage:

Always check the work area for hidden gas pipes, electrical wires, and water pipes when making blind cuts.

Before each use, check that the blade is clean, sharp and free from cracks, loose teeth, missing teeth, broken teeth, and any other damage.

Do not use a dirty, dull, or damaged blade as this may result in blade pinching, binding or stalling, kickback and loss of control. These situations can cause the saw to jump back at the operator and result in a serious injury. Carbide is a hard, but brittle material. Foreign objects in the workpiece such as wire or nails can cause the carbide tips to crack or break. Overheating a saw blade can cause it to warp and result in kickback. Buildup of sap on the blades, insufficient blade set, dullness, and unguided cuts, can all cause an overheated blade and kickback.

Always use blades of the correct size with the correct arbor hole shape and size for your power tool.

Blades that do not match the mounting hardware of the power tool will run eccentrically, causing loss of control, increasing the risk of personal injury. Make sure the speed marked on the blade is at least as high as the no-load RPM marked on the power tool. To assure proper rotation direction of the saw blade, the arrow direction on the blade must correspond with the arrow direction on the saw. Mount blade properly with the correct blade washers and bolt for the power tool.

To reduce the risk of injury:

Never operate the power tool without proper safety guards in place.

Lame de scie circulaire ultra-fine Tarantula™ 6-1/2" 48 dents TCT

Product Details

Why Choose Spyder Tarantula™

Up to 6x longer lasting than regular blades — rip and cross cut with ease

Ultra tough NiCo (nickel cobalt) cutting teeth make the cleanest cuts

Smooth running and quick cutting — Tarantula™ blades provide durable cutting over the life of the blade

Alternating tooth bevel with a flat top raker (ATB-R) and interfused anti-friction coating provides exceptionally smooth cuts

Polymer-filled stabilization vents reduce noise and vibrations for a straighter cut

1-in arbor

For use on circular saws with a 6,000 RPM maximum

Not recommended for engineered laminate flooring

Safety Instructions & Warnings

To reduce the risk of injury:

Use personal protective equipment. Always wear eye protection.

WARNING:

To reduce the risk of explosion, electric shock, and property damage:

Before each use, check that the blade is clean, sharp and free from cracks, loose teeth, missing teeth, broken teeth, and any other damage.

Always use blades of the correct size with the correct arbor hole shape and size for your power tool.

To reduce the risk of injury: