Kit de scies cloches bimétalliques Rapid Core Eject™ bimétalliques 11 pièces

Kit de scies cloches bimétalliques Rapid Core Eject™ bimétalliques 11 pièces

SKU: 600886

Les lames bimétalliques durables créent des coupes lisses dans l'acier, l'acier inoxydable, le bois clouté, les plastiques et plus encore -
Utilisez l'arbre Rapid Core Eject™ de Spyder pour couper jusqu'à 5 fois plus rapidement que les scies cloches standard : retirez les noyaux sans faire levier, coupez en biais et agrandissez les trous existants .
Le pas de dent variable permet une coupe rapide et nette à travers toutes les épaisseurs de matériaux jusqu'à 1-7/8 po -
L'acier bimétallique résistant offre une longue durée de vie dans les applications de perçage difficiles -
Le filetage universel utilise des forets Spyder/pilotes ou d'autres mandrins de scie cloche universels -
Crée des coupes lisses dans l'acier, l'acier inoxydable, l'aluminium, le bois cloué, les métaux non ferreux, les plastiques/PVC et plus encore -
Profondeur de coupe de 1-7/8 po -
Percez toujours à l'aide d'un moteur de perceuse équipé d'une poignée de support -
Ne pas utiliser en mode marteau perforateur -

Product Details

Spyder’s Bi-Metal hole saws feature variable tooth pitch geometry and bi-metal steel that make them the durable choice for making holes in wood with nails, metals and plastics. Use Spyder’s Rapid Core Eject™ arbor system to remove cores without prying — drill hole, press button, pull back the hole saw, and eject the core. Cut at an angle, and use two adapters (second adapter sold separately) on one pilot bit to enlarge existing holes. All Spyder hole saws fit on Spyder Rapid Core Eject™ arbor/pilot bits, and on universal hole saw arbors.

Why Choose Spyder Rapid Core Eject™

Durable bi-metal blades create smooth cuts in steel, stainless steel, nail-embedded wood, plastics and more

Use Spyder’s Rapid Core Eject™ arbor to cut up to 5x faster than standard hole saws — remove cores without prying, cut at an angle, and enlarge existing holes

Variable tooth pitch provides a fast clean cut through all material thicknesses up to 1-7/8-in

Tough bi-metal steel provides long life in tough drilling applications

Universal thread uses Spyder arbor/pilot bits or other universal hole saw arbors

Creates smooth cuts in steel, stainless steel, aluminum, nail-embedded wood, non-ferrous metal, plastics/PVC and more

1-7/8-In depth of cut

Always drill using a drill motor that is equipped with a support handle

To reduce the risk of injury:

Read the instruction manual and follow the safety regulations of the power tool you will be using with your Spyder accessory.

Use personal protective equipment. Always wear eye protection.

Protective equipment such as a dust mask, non-skid safety shoes, protective apparel and hearing protection should be used in appropriate conditions to reduce the risk of personal injury.

WARNING:

Operating the tool without wearing proper protection may result in serious injury.

Do not use near flammable materials or gases!

To reduce the risk of explosion, electric shock, and property damage, always check the work area for hidden gas pipes, electrical wires, and water pipes when making blind and/or plunge cuts.

Before each use:

Check that the hole saw is free from damage and excessive wear. Discard hole saw if damage is noticed or suspected as this can cause excessive friction, saw binding, kickback, create dangerous flying debris and/or create other unsafe situations that may cause injury.

Use a pilot bit which is correctly sized for the hole saw being used.

Hex-based pilot bits are intended to be used with hex-based arbor adapters and hole saws. Use a pilot bit which is correctly sized for the hole saw being used. Always be sure that the pilot bit extends
beyond the cutting edge of the saw by at least ¼”; for deep cut hole saws, the pilot bitshould extend at least 1” beyond the cutting edge of the saw.

WARNING: Hole saws are not to be used in hammer or impact mode!

Only drill in standard rotary drilling mode. Drilling in hammer or impact mode can cause the hole saw to become damaged/broken and can increase the likelihood of user injury due to dangerous flying debris or other unsafe situations.
For TCT saws recommended for use on concrete products, brick, or tile materials, check the Mohs hardness of the material to be drilled. Materials like poured concrete, some brick/block, floor tile, ceramic tile, porcelain, and others, may have a Mohs hardness of higher than 6. The TCT hole saw is not recommended for use in materials with a Mohs hardness of higher than 6.

To reduce the risk of injury:

Read the Spyder Hole Saw RPM Chart for the recommended operating speed for the saw size and the material being cut.
Use the proper pilot bit and hole saw for your material. Only drill materials that are listed on the product label.
Use a drill motor that is equipped with a support handle.
Start cutting with a light forward pressure. For cuts that are square to the surface, start the cutting process with the saw square to the material being cutso all teeth begin to cut at the same time. This will help prevent premature wear and damage to the saw. Feeding the saw in and out or using a slight circular rocking motion may assist in clearing material shavings from the hole being cut. When sawing in wood, finish the hole from the opposite side to prevent splintering. Once the pilot bit has broken through the other side, you can use this hole to guarantee you are in line with where you have already started cutting.

Included in Set

Scie cloche bimétallique Rapid Core Eject™ 3/4"