8-Piece Remodeling Accessory Kit for Reciprocating Saws

8-Piece Remodeling Accessory Kit for Reciprocating Saws

SKU: 900404

Includes 4.5-inch wire brush, 2-inch scraper blade, 1/16-inch grout-out tool, 6-inch bore-blade, and corner sanding pad with 80, 120, and 220 grit sandpaper
Complete nearly any remodeling project with the help from this 5-piece reciprocating saw attachment set
Universal attachments fit into any reciprocating saw

Product Details

Master your remodeling project with the reciprocating saw attachments in the handy Spyder Remodeling Kit. This remodeling kit includes 5 reciprocating saw attachments that helps you with your home improvement project from start to finish. Each attachment is universal so they work with any reciprocating saw, and made from tough materials for use through many projects. The kit includes a 4.5-inch wire brush, 2-inch scraper blade, 1/16-inch grout-out tool, 6-inch bore-blade, and corner sanding pad with 80, 120, and 220 grit sandpaper. You can tear up your tile with the scraper and grout-out tool, use the bore-blade to cut piping, sand flooring to perfection with the sander, and clean up any small imperfections with the wire brush. Pick up a set of tools that gets you from start to finish on your DIY projects with the Spyder Remodeling Kit.

Why Choose Spyder

Includes 4.5-inch wire brush, 2-inch scraper blade, 1/16-inch grout-out tool, 6-inch bore-blade, and corner sanding pad with 80, 120, and 220 grit sandpaper

Complete nearly any remodeling project with the help from this 5-piece reciprocating saw attachment set

Universal attachments fit into any reciprocating saw

Scraper blade can be resharpened and works great scraping and ripping tough materials like tile, glue and mud adhesives, and thin-set

Grout-out tool powers through grout including urethane and epoxy

Wire brush helps you clean up the final stages by removing small imperfections like scratches, dirt, flaking paint, and rust

Bore-blade can cut from 3 directions, and its bi-metal, shatter-resistant steel can cut through wood, metal, plastic, and fiberglass

Rounded tip masters plunge cuts with ease

To reduce the risk of injury:

Read the instruction manual and follow the safety regulations of the power tool you will be using with your Spyder accessory.

Use personal protective equipment. Always wear eye and respiratory protection.

Protective equipment such as hearing protection, non-skid safety shoes, and protective apparel should be used for appropriate conditions to reduce the risk of personal injury.

WARNING:

Operating the tool without wearing proper protection may result in serious injury.

Before each use:

Make sure the sander is unbent and check the sander for wear, cracks, and other damage. Do not use an excessively worn or damaged sander as this can damage the workpiece, cause kickback, create dangerous flying debris and/or create other unsafe situations that may cause injury. For better clearance from the workpiece, install the sander upside down.

WARNING: Reciprocating sanders are not to be used in orbital mode!

Only use sanders with straight reciprocating (non-orbital) action. Using the power tool in orbital mode can cause loss of control, damage the sanderand the workpiece, and can increase the likelihood of user injury due to dangerous flying debris, tool kickback, and other unsafe situations.