7-1/4" 56-Zahn-Sägeblatt für Aluminium

SKU: 13517

NiCo™ Hartmetallzähne Hochleistungsfähige Nickel-Kobalt-Hartmetallzähne bleiben länger scharf und sind verschleißfest beim Schneiden von weichen Metallen wie Aluminium.
Dreifach-Chip-Schliff (TCG): Die TCG-Zahngeometrie sorgt für sauberere Schnitte und reduziert die Gratbildung bei Nichteisenmetallen wie Aluminium und Messing.
Die reibungsarme Beschichtung trägt dazu bei, Verklebungen, Widerstand und Wärmeentwicklung zu reduzieren – für glatte Schnitte und eine längere Lebensdauer der Klinge.

Product Details

Cut through aluminum with clean precision and relentless durability using the Spyder Aluminum Circular Saw Blade. Built with NiCo™ carbide teeth and a specialized TCG (Triple Chip Grind) tooth design, this blade delivers smooth, burr-free cuts in soft non-ferrous metals without clogging or gumming. The anti-friction coating keeps the blade running cool and clean, extending life and performance. Whether you're cutting extrusions, tubing, or sheet aluminum, this blade gives you the control and edge you need to cut like a pro.

Why Choose Spyder Aluminum

NiCo™ Carbide Teeth - High-performance nickel-cobalt carbide teeth stay sharp longer and resist wear when cutting soft metals like aluminum.

Triple Chip Grind (TCG) - TCG tooth geometry delivers cleaner cuts and reduces burring in non-ferrous metals like aluminum and brass.

Anti-Friction Coating - Helps reduce gumming, drag, and heat buildup-keeping cuts smooth and extending blade life.

Precision Cutting in Aluminum - Optimized for extrusions, channels, and aluminum sheet-ideal for fabrication, trim, and finish work.

Reduced Vibration & Cleaner Finish - Balanced design and grind geometry reduce chatter and ensure smoother, more accurate cuts every time.

To reduce the risk of injury:

Read the instruction manual and follow the safety regulations of the power tool you will be using with your Spyder accessory.

Use personal protective equipment. Always wear eye protection.

Protective equipment such as a dust mask, non-skid safety shoes, hard hat and hearing protection should be used in appropriate conditions to reduce the risk of personal injury

WARNING:

Operating the tool without wearing proper eye protection may result in serious injury.

To reduce the risk of explosion, electric shock, and property damage:

Always check the work area for hidden gas pipes, electrical wires, and water pipes when making blind cuts.

Before each use, check that the blade is clean, sharp and free from cracks, loose teeth, missing teeth, broken teeth, and any other damage.

Do not use a dirty, dull, or damaged blade as this may result in blade pinching, binding or stalling, kickback and loss of control. These situations can cause the saw to jump back at the operator and result in a serious injury. Carbide is a hard, but brittle material. Foreign objects in the workpiece such as wire or nails can cause the carbide tips to crack or break. Overheating a saw blade can cause it to warp and result in kickback. Buildup of sap on the blades, insufficient blade set, dullness, and unguided cuts, can all cause an overheated blade and kickback.

Always use blades of the correct size with the correct arbor hole shape and size for your power tool.

Blades that do not match the mounting hardware of the power tool will run eccentrically, causing loss of control, increasing the risk of personal injury. Make sure the speed marked on the blade is at least as high as the no-load RPM marked on the power tool. To assure proper rotation direction of the saw blade, the arrow direction on the blade must correspond with the arrow direction on the saw. Mount blade properly with the correct blade washers and bolt for the power tool.

To reduce the risk of injury:

Never operate the power tool without proper safety guards in place.

7-1/4" 56-Zahn-Sägeblatt für Aluminium

Product Details

Why Choose Spyder Aluminum

NiCo™ Carbide Teeth - High-performance nickel-cobalt carbide teeth stay sharp longer and resist wear when cutting soft metals like aluminum.

Triple Chip Grind (TCG) - TCG tooth geometry delivers cleaner cuts and reduces burring in non-ferrous metals like aluminum and brass.

Anti-Friction Coating - Helps reduce gumming, drag, and heat buildup-keeping cuts smooth and extending blade life.

Precision Cutting in Aluminum - Optimized for extrusions, channels, and aluminum sheet-ideal for fabrication, trim, and finish work.

Reduced Vibration & Cleaner Finish - Balanced design and grind geometry reduce chatter and ensure smoother, more accurate cuts every time.

Safety Instructions & Warnings

To reduce the risk of injury:

Use personal protective equipment. Always wear eye protection.

WARNING:

To reduce the risk of explosion, electric shock, and property damage:

Before each use, check that the blade is clean, sharp and free from cracks, loose teeth, missing teeth, broken teeth, and any other damage.

Always use blades of the correct size with the correct arbor hole shape and size for your power tool.

To reduce the risk of injury: