Grout
  Out™

[ Grout-Out™ ]

Its carbide-grit edge makes it easy to replace one tile—or all of them.

  Features

  • Fits all reciprocating saws
  • 10x faster than hand removal
  • Vacuum-braised tungsten carbide grit
  • Power through any grout in a fraction of the time—including urethane and epoxy
  • 1/16″ blade is designed for joints 1/16″ to 3/16″ wide
  • 3/16″ blade is designed for joints 3/16″ and wider
  • Do not use with saws that operate with orbital action

"If you have a grout removal job and own a reciprocating saw, this is THE tool for you. It works just like the typical hand-held grout saw, but works 100 times faster."

- AzleTexan

"Highly recommended to anyone doing tile work. Grout came right up, made a large project seem small."

- J. Ponton

"Works very well when cutting through grout and helps if you are trying to remove tile that you need to reuse."

- d c

Instructions & Warnings

INSTRUCTIONS:

1. Insert Spyder Grout-Out™ like you would a saw blade. For increased control, point grit edge up and
overturn your saw for use.
2. Place against grout and slowly start applying light to moderate pressure.
3. At a comfortable speed, work the saw forward and backward until grout is removed.

WARNING

Sharp blade can cause laceration or puncture wound. Kick back may occur if instructions are not followed. Always wear a mask to prevent inhalation of dust and debris. Wear safety glasses and protective apparel to prevent injury from flying debris. Follow the manufacturer’s instructions when operating your power tools. Failure to heed all instructions and warnings can result in serious bodily injury. DO NOT USE WITH SAWS OPERATING WITH ORBITAL ACTION.